Cleaning and maintenance methods for integrated intelligent toilets
Purchase knowledge of integrated intelligent toilets
1. The more functions, the better: the more functions, the more value consumers will feel, but generally as long as they have functions such as “ sit-in self-test, ” seat heating, ” warm water cleaning, “ warm air drying, “ automatic deodorization, “ nozzle mobile massage and cleaning, “ power saving, ” etc. are enough. Now most brands on the market do a good job in these major functions, and the difference lies in the performance of details.
2. The higher the safety factor, the better: When purchasing, you must see whether the national standards are met and require the presentation of relevant documents and materials.
3. Is it easy to clean:
Carefully observe the surface of the toilet, see if it is flooded under the light, and then touch the surface with your hand. It should be smooth, smooth, and crystal-colored; there are no obvious needle holes, glaze and cracks; if you tap the toilet, the sound will be crisp and pleasant, without cracking, and the appearance will not be deformed. Reach your hand to the sewage pipe to see if the sewage outlet also has glaze.
4. Sewage discharge capacity:
Good smart toilets discharge thoroughly, with large erosion area, low noise, water saving, smooth surface, and low water absorption rate.
5. After-sales service is also very important:
Smart toilets are technological products and are very troublesome to repair. When purchasing, you must ask clearly the warranty period and detailed terms.
6. Pay attention to the selection of accessories:
The toilet tank accessories are easily overlooked. In fact, water tank accessories are like the heart of the toilet and are more likely to cause quality problems. When purchasing, you should pay attention to choosing accessories with good quality, low water injection noise, strong, durable and airtightness, and can withstand long-term soaking of water without corrosion or scale. When choosing, be sure to put your hand into the water outlet hole of the toilet to touch whether the glaze is smooth and how far it can stretch. In order to reduce costs, some toilet merchants do not have glaze in the invisible areas in the water hole, and it is easy to hang dirt when used, and it is very easy to block over time. There will be water outlet holes in the upper part of the inner side of the toilet in one round, usually 24. The more holes, the shorter the spacing, the higher the coverage rate when flushing, and it will be easier to flush clean. Use your hands to touch the toilet surface, and be smooth and delicate. The appearance of the toilet should be simple and have few grooves, making it easier to clean. In addition, no matter how embarrassing you are, you must sit on the spot and try it out. Personal sitting is actually very important. In addition, when delivering goods, you must unbox the goods in front of the merchant to check whether there are obvious defects, bumps, and whether there are color differences in each part. Maintenance of integrated intelligent toilet
1. Do not knock or trample on the bathroom pottery sanitary ware.
2. Close the toilet lid and do not be fast.
3. Please gently wipe the sanitary ware with clean water. Do not use cleaning agents, solvents, etc. with grinding effect or strong (acid and alkaline) cleaning agents, solvents, etc. to avoid damage to the product surface and accessories.
4. Do not close the detergent immediately when pouring into the toilet. rinse it with water and then close it.
5. Do not use high-temperature water to clean bathroom sanitary ware.
6. The electronic eyes of the smart toilet should be avoided with water to prevent possible induction circuit board wet water or electrical short circuits.
7. If the product is still unable to be processed according to the instructions for use, you should contact the local agent or manufacturer in time for professional repairs and do not take any action to cause accidental damage. Cleaning of integrated intelligent toilets The cleaning of toilets can be used to clean the toilets with a brush or sponge sold on the market, with a neutral detergent plus cool water or warm water. Pay special attention to the edge of the water ring and the drainage outlet below the water seal when cleaning, because these two places are the most likely places to hide dirt in the toilet. When the toilet lid is dirty, you can use a cloth to wipe it with a neutral detergent. You must never use gasoline, rosin volatile liquid, acidic solvent or hot water to wipe the toilet lid. Another method is to use vinegar instead of neutral detergent, then wipe and flush, and repeat this a few times. For the water stop rubber of the toilet water inlet valve, it is prone to aging and failing in places with poor water quality. It must be taken out and cleaned frequently.